--- url: /academy-handbook/foundation/week-2/part-5-l1-l2-and-bridges.md --- # Week 2 · Part 5 — L1, L2, sidechains and bridges [Part 2](./part-2-comparing-blockchains.md) left Ethereum with an unresolved scaling challenge. Ethereum historically kept L1 capacity conservative so that validation remained accessible, while scaling heavily through Layer 2s. Today it is scaling both: gradually increasing L1 capacity while continuing to expand L2 capacity. This is how the scaling trade-off is managed. And once there are many networks, a second problem appears: **they cannot see each other.** ## Learning objectives * Explain what a Layer 2 is and what it inherits from its Layer 1 * Distinguish a Layer 2 from a sidechain by their security assumptions * Explain why bridges are necessary and where their risk sits ## Core ### Why L2 exists Ethereum can and does improve its L1 capacity over time. But if every L1 node has to process dramatically more work, the hardware and bandwidth needed to verify the chain can rise too. If independent verification becomes expensive, fewer people may be able to participate. One scaling approach is therefore to move much of the everyday activity elsewhere while keeping Ethereum as an important settlement and security base. Picture Ethereum L1 as a very secure but crowded main road. An L2 is like an elevated expressway handling much of the everyday traffic separately. The analogy explains capacity, not the security relationship. An L2 is not simply another independent road network: it sends enough data, results or proofs back so Ethereum can help check or settle the L2's state according to that design. \==**L2 does much of the busy work; L1 keeps the important receipts and acts as the referee.**== This is a model, not a claim that every L2 transaction is later re-executed one by one on Ethereum. This is why Ethereum scales in two directions at once: L1 improvements and L2 expansion. ### One more picture: where is the final court? The expressway helped with capacity. Now use a different picture for the question of final security and settlement: :::: card-grid ::: card title="L1 — runs its own court" icon="material-symbols:gavel" Own consensus, security and final history. Ethereum, Solana and Monad each maintain their own network-level record. ::: ::: card title="L2 — relies on the higher court" icon="material-symbols:account-balance" Handles much activity separately while relying on an L1 for important settlement and security, plus extra L2 machinery. ::: ::: card title="Sidechain — neighbouring court" icon="material-symbols:location-city" Runs its own validator and security system. It can connect to Ethereum through bridges, but Ethereum does not automatically guarantee its internal history. ::: :::: The analogy is only about where final trust and security sit. Blockchains are not literally legal systems. ### Three security relationships Now make the picture precise. The first table focuses only on the security and settlement relationship: | Security relationship | Plain-English meaning | Examples | Key question | |---|---|---|---| | **L1** | Secures and settles its own final history | Ethereum, Solana, Monad | Who secures this network itself? | | **L2** | Handles activity separately while relying on an L1 for important settlement or security | Base, Arbitrum | What does it inherit from the L1, and what additional L2 machinery do I trust? | | **Sidechain** | Separate connected chain with its own validator and security system | Polygon PoS | Who secures this chain itself? | ::: important The distinction that actually matters **==L2 versus sidechain — and it is about where security comes from.==** Not speed, not fees, not branding. ::: ### Other labels answer different questions These labels answer different questions, so they can be combined rather than treated as mutually exclusive categories: * **Settlement / security relationship:** L1, L2 or sidechain * **Execution environment:** EVM-compatible, or another execution environment * **Purpose:** general-purpose or application-specific (an appchain) * **Participation:** public, private or permissioned * **Communication:** bridge, IBC or another cross-chain messaging mechanism For example, **Base** can be described as an Ethereum L2 + EVM-compatible + general-purpose; **Monad** as an L1 + EVM-compatible + general-purpose; and an application-specific Avalanche L1 as an L1 + appchain. A chain can have several labels because each label describes a different dimension. \==**Appchain is a purpose label, not a security-layer label.**== An appchain could be its own L1, use a shared-security model, or be an application-specific L2. The term tells you what the chain is mainly for, not automatically who secures it. See the Avalanche example in [Part 2](./part-2-comparing-blockchains.md) for why an application might want its own environment. ### Why not just build another L1? A new L1, such as Solana or Monad, can optimise its own architecture and keep control of its validators, consensus and final history. But it must attract and fund its own security, infrastructure, liquidity and ecosystem. An Ethereum L2, such as Base or Arbitrum, handles activity separately and tries to reuse Ethereum as an important settlement and security base, while accepting extra L2-specific assumptions such as sequencers, upgrade controls and withdrawal mechanisms. In shorthand: :::: card-grid ::: card title="Build a new L1" icon="material-symbols:construction" * More control over architecture, validators and final history * Your project must fund or attract its own security, infrastructure, liquidity and ecosystem ::: ::: card title="Build an L2" icon="material-symbols:layers" * Reuse an important Ethereum settlement/security relationship * Add L2 machinery such as sequencers, upgrades and withdrawal paths ::: :::: Neither is universally better. They optimise for different things. ### How a Layer 2 works Now zoom in on the expressway. Many Ethereum L2s use a design called a **rollup**: **do the work elsewhere, but post enough to Ethereum that Ethereum remains the referee.** **Many L2 transactions can be batched into L1 postings, so the L1 cost is shared across them.** That is where the cost reduction comes from — not from cutting corners on verification, but from amortising it. ::: important What a mature rollup is designed to do **A mature rollup is designed so you do not have to trust one operator forever.** Enough data goes to Ethereum that, in principle, your balance can be reconstructed and withdrawn even if the operators turn against you. \==**But "designed to" is doing real work in that sentence.**== Real networks differ in maturity, upgrade controls, data availability and withdrawal mechanisms. Some networks marketed as L2s do not yet provide that guarantee in practice. ::: There are two broad approaches. An optimistic-style rollup accepts a result unless someone successfully challenges a bad one. A validity/ZK-style rollup provides a cryptographic proof that the result follows the rules. | Dimension | **Optimistic rollups** | **ZK rollups** | |---|---|---| | Assumption | Batches are valid unless challenged | Validity is proven mathematically | | Challenge window | ~7 days | None needed | | Withdrawal to L1 | Slow (the window) | Fast | | Examples | Arbitrum, Optimism, Base | zkSync, Starknet, Linea, Scroll | ::: tip How ZK proofs work is Further Exploration For Foundation, know that one approach **waits and watches**, the other **proves** — and that this affects how long withdrawals take. ::: ### Why choose a sidechain? From the court picture, the defining choice is already clear: a sidechain runs its own security system. It may still be attractive because it can choose its own validator rules, optimise fees or performance, and stay connected to Ethereum users, assets and tooling. | Dimension | **Layer 2** | **Sidechain** | |---|---|---| | Security from | Ethereum | Its own validators | | If operators turn malicious | Designed to allow exit via L1; maturity varies | **Your funds depend on them** | ::: warning Do not ask only "Is this an L2?" Ask: **what do I still have to trust?** That question stays accurate as the ecosystem changes, and it separates networks that genuinely inherit Ethereum's security from ones that only say they do. [L2BEAT](https://l2beat.com/) answers it network by network, including which self-described L2s do not yet fully qualify. ::: **Polygon PoS** is a useful sidechain example: it is connected to Ethereum, but its own validator and security system remains a separate assumption. Its design says: **“I want to stay connected to the Ethereum ecosystem, but I want to run my own security system.”** That is different from being an L2 that aims to reuse Ethereum's security, not an inferior version of it. ### Bridges Blockchains are isolated by design. Ethereum has no way to observe Bitcoin; Solana cannot read Ethereum's state. Each only knows its own. Think of two blockchains as two banks keeping separate ledgers. Bank B cannot simply assume that a balance change recorded inside Bank A's system really happened; it needs evidence it is willing to trust. The analogy stops there — a bridge is not a bank, but a mechanism that carries or verifies evidence between separate on-chain systems. Names such as **Across** and **Wormhole** are examples of systems used to move assets or messages across networks. They do not all work the same way, so the important question is what convinces the destination network that the event on the source network really happened. ::: tabs @tab Asset bridges They move value. The usual mechanism is lock-and-mint: ```mermaid flowchart LR A["Chain A
10 ETH locked
in a contract"] -->|"bridge observes
and attests"| B["Chain B
10 wrapped ETH
minted"] B -->|"burn to
redeem"| A ``` Nothing physically crosses. The original is immobilised on one side and a representation created on the other — Week 1 Part 5's wrapped assets, with the mechanism now visible. @tab Message bridges They move *information* rather than value: "this happened on chain A" delivered to chain B, so a contract there can act on it. More general, and the foundation of cross-chain applications. ::: ### Bridge risk ::: danger Bridges have historically been a major source of large crypto exploits Hundreds of millions of dollars have been lost in repeated incidents. The structural reason is not bad luck. ::: | Point | Why it matters | |---|---| | **1** | A bridge holds a large pool of locked assets — an unusually concentrated target | | **2** | Something must attest that the lock really happened. **That attestation is the weak point.** Forge it and unlimited wrapped assets can be minted with nothing backing them | | **3** | You inherit three risk surfaces at once — source chain, destination chain, and the bridge between | Who performs that attestation varies enormously — a small multisig, a validator set, a light client, a cryptographic proof — and the differences are the difference between "reasonably safe" and "one compromised key away from catastrophe". ::: important Evaluating those mechanisms is deliberately Further Exploration For Foundation, hold this: \==**A wrapped asset is only as good as the mechanism holding the original. A bridge adds a trust assumption that neither chain had on its own.**== ::: Week 3 Part 1 shows how a DApp's frontend, wallet, RPC route and smart contracts sit on top of these network layers. ## Landscape * **Rollup** — an L2 that processes transactions away from the base chain and sends data or proofs back to it. Ethereum can check or settle the result while many users share the L1 cost * **Fraud proof / validity proof** — two ways an L2 can show Ethereum why a result should be accepted. One lets a bad result be challenged; the other provides a mathematical proof that the result follows the rules * **Sequencer** — the service that decides the order of many L2 transactions before a batch is posted to L1. A centralised sequencer can delay or censor transactions, but that does not automatically mean it can steal user funds * **Data availability** — keeping the transaction details needed to check what happened or recover a position accessible. If the data disappears, checking the L2 history becomes much harder * **Canonical vs third-party bridge** — a bridge promoted by the network, or one run independently. Neither label removes the need to check its contracts and verification process * **IBC** — Cosmos's native messaging standard for connected chains. It lets them send verified messages without turning them into one shared ledger * **Cross-chain protocols** — services such as LayerZero, Wormhole and Across that carry messages or assets between chains. They add another system that must be checked; see Week 4 * **Chain abstraction / intents** — a user describes the result they want, such as a swap, without choosing every chain step. The application or another service chooses the route, which is simpler but adds a new dependency ## Worked example > **"Base fees are cents and Ethereum's are dollars. Why would anyone use > Ethereum?"** | Aspect | Ethereum L1 | Base (L2) | |---|---|---| | Fee for a swap | Typically higher | Typically lower | | Confirmation | Explicit finality: roughly minutes | Seconds | | Who orders transactions | Thousands of validators | **A sequencer, currently operated by Coinbase** | | If that operator fails | N/A | Exit via Ethereum is the designed escape route — check the network's actual maturity | | Security ultimately from | Itself | **Ethereum** | Base is cheap **because it batches work and posts the result to Ethereum.** Rollups aim to share Ethereum's settlement and security while accepting additional L2-specific assumptions, such as sequencers, upgrade controls and withdrawal maturity. What you accept is a centralised sequencer today, which can in principle censor or reorder, and a withdrawal path that is not instant. ::: important Both choices are correct, for different jobs For a small everyday transaction, an L2 will often be the practical choice because fees matter. For very high-value settlement, some users may prefer paying more for direct L1 settlement — but the right choice depends on the application's requirements. That sentence is Week 2 in miniature — and [Part 6](./part-6-trust-and-risk-map.md) turns it into a tool you can point at anything. ::: ::: details Further exploration — optional, not assessed * [L2BEAT](https://l2beat.com/) — pick one network and read its risk summary. The clearest public writing on trust assumptions anywhere * [ethereum.org — Layer 2](https://ethereum.org/layer-2/) — the rollup-centric strategy explained * [ethereum.org — Bridges](https://ethereum.org/developers/docs/bridges/) — including a frank account of the risks * **ZK proofs, data availability, modular architecture, bridge verification** — the genuine frontier, firmly optional here ::: ::: details Sources and attribution * [ethereum.org — Layer 2](https://ethereum.org/layer-2/) — Reuse (CC BY 4.0), adapted * [ethereum.org — Scaling](https://ethereum.org/developers/docs/scaling/) — Reuse (CC BY 4.0), adapted * [ethereum.org — Bridges](https://ethereum.org/developers/docs/bridges/) — Reuse (CC BY 4.0), adapted * [ethereum.org — Layer 2 rollup visual](https://ethereum.org/layer-2/learn/) — Reuse (CC BY 4.0), local copy at `/learning/ethereum-org/layer-2-rollup.png` * [L2BEAT](https://l2beat.com/) — Link, referenced only * [Base documentation](https://docs.base.org/) · [Arbitrum documentation](https://docs.arbitrum.io/) · [Optimism documentation](https://docs.optimism.io/) — Link, referenced for current L2 examples * [Starknet documentation](https://docs.starknet.io/) · [ZKsync documentation](https://docs.zksync.io/) — Link, referenced for current validity/ZK-style L2 examples * [Polygon PoS documentation](https://docs.polygon.technology/pos/) — Link, referenced for the sidechain example * [Cosmos IBC documentation](https://docs.cosmos.network/ibc/latest/ibc/overview) — Link, referenced for the IBC/appchain context * [Across documentation](https://docs.across.to/) · [Wormhole documentation](https://wormhole.com/docs/) — Link, referenced for bridge examples *Named networks are illustrative examples, not recommendations.* :::